DRV8825 motor driver
DRV8825 stepper driver
Max current 2.5A
The DRV8825 provides an integrated motor driver 1• PWM Microstepping Stepper Motor Driver solution for printers, scanners, and other automated – Built-In Microstepping Indexer equipment applications. The device has two H-bridge – Up to 1/32 Microstepping drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver • Multiple Decay Modes block consists of N-channel power MOSFET’s – Mixed Decay configured as full H-bridges to drive the motor – Slow Decay windings. The DRV8825 is capable of driving up to – Fast Decay 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C). • 8.2-V to 45-V Operating Supply Voltage Range • 2.5-A Maximum Drive Current at 24 V and A simple STEP/DIR interface allows easy interfacing T to controller circuits. Mode pins allow for configuration A = 25°C of the motor in full-step up to 1/32-step modes. Decay • Simple STEP/DIR Interface mode is configurable so that slow decay, fast decay, • Low Current Sleep Mode or mixed decay can be used. A low-power sleep • Built-In 3.3-V Reference Output mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This • Small Package and Footprint sleep mode can be set using a dedicated nSLEEP • Protection Features pin. – Overcurrent Protection (OCP) Internal shutdown functions are provided for – Thermal Shutdown (TSD) overcurrent, short circuit, under voltage lockout and – VM Undervoltage Lockout (UVLO) over temperature. Fault conditions are indicated via the nFAULT pin. – Fault Condition Indication Pin (nFAULT)
The DRV8825 provides an integrated motor driver 1• PWM Microstepping Stepper Motor Driver solution for printers, scanners, and other automated – Built-In Microstepping Indexer equipment applications. The device has two H-bridge – Up to 1/32 Microstepping drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver • Multiple Decay Modes block consists of N-channel power MOSFET’s – Mixed Decay configured as full H-bridges to drive the motor – Slow Decay windings. The DRV8825 is capable of driving up to – Fast Decay 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C). • 8.2-V to 45-V Operating Supply Voltage Range • 2.5-A Maximum Drive Current at 24 V and A simple STEP/DIR interface allows easy interfacing T to controller circuits. Mode pins allow for configuration A = 25°C of the motor in full-step up to 1/32-step modes. Decay • Simple STEP/DIR Interface mode is configurable so that slow decay, fast decay, • Low Current Sleep Mode or mixed decay can be used. A low-power sleep • Built-In 3.3-V Reference Output mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This • Small Package and Footprint sleep mode can be set using a dedicated nSLEEP • Protection Features pin. – Overcurrent Protection (OCP) Internal shutdown functions are provided for – Thermal Shutdown (TSD) overcurrent, short circuit, under voltage lockout and – VM Undervoltage Lockout (UVLO) over temperature. Fault conditions are indicated via the nFAULT pin. – Fault Condition Indication Pin (nFAULT)
DRV8825 stepper driver
Max current 2.5A
The DRV8825 provides an integrated motor driver 1• PWM Microstepping Stepper Motor Driver solution for printers, scanners, and other automated – Built-In Microstepping Indexer equipment applications. The device has two H-bridge – Up to 1/32 Microstepping drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver • Multiple Decay Modes block consists of N-channel power MOSFET’s – Mixed Decay configured as full H-bridges to drive the motor – Slow Decay windings. The DRV8825 is capable of driving up to – Fast Decay 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C). • 8.2-V to 45-V Operating Supply Voltage Range • 2.5-A Maximum Drive Current at 24 V and A simple STEP/DIR interface allows easy interfacing T to controller circuits. Mode pins allow for configuration A = 25°C of the motor in full-step up to 1/32-step modes. Decay • Simple STEP/DIR Interface mode is configurable so that slow decay, fast decay, • Low Current Sleep Mode or mixed decay can be used. A low-power sleep • Built-In 3.3-V Reference Output mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This • Small Package and Footprint sleep mode can be set using a dedicated nSLEEP • Protection Features pin. – Overcurrent Protection (OCP) Internal shutdown functions are provided for – Thermal Shutdown (TSD) overcurrent, short circuit, under voltage lockout and – VM Undervoltage Lockout (UVLO) over temperature. Fault conditions are indicated via the nFAULT pin. – Fault Condition Indication Pin (nFAULT)
The DRV8825 provides an integrated motor driver 1• PWM Microstepping Stepper Motor Driver solution for printers, scanners, and other automated – Built-In Microstepping Indexer equipment applications. The device has two H-bridge – Up to 1/32 Microstepping drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver • Multiple Decay Modes block consists of N-channel power MOSFET’s – Mixed Decay configured as full H-bridges to drive the motor – Slow Decay windings. The DRV8825 is capable of driving up to – Fast Decay 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C). • 8.2-V to 45-V Operating Supply Voltage Range • 2.5-A Maximum Drive Current at 24 V and A simple STEP/DIR interface allows easy interfacing T to controller circuits. Mode pins allow for configuration A = 25°C of the motor in full-step up to 1/32-step modes. Decay • Simple STEP/DIR Interface mode is configurable so that slow decay, fast decay, • Low Current Sleep Mode or mixed decay can be used. A low-power sleep • Built-In 3.3-V Reference Output mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This • Small Package and Footprint sleep mode can be set using a dedicated nSLEEP • Protection Features pin. – Overcurrent Protection (OCP) Internal shutdown functions are provided for – Thermal Shutdown (TSD) overcurrent, short circuit, under voltage lockout and – VM Undervoltage Lockout (UVLO) over temperature. Fault conditions are indicated via the nFAULT pin. – Fault Condition Indication Pin (nFAULT)
$11.65
DRV8825 motor driver—
$11.65
Description
DRV8825 stepper driver
Max current 2.5A
The DRV8825 provides an integrated motor driver 1• PWM Microstepping Stepper Motor Driver solution for printers, scanners, and other automated – Built-In Microstepping Indexer equipment applications. The device has two H-bridge – Up to 1/32 Microstepping drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver • Multiple Decay Modes block consists of N-channel power MOSFET’s – Mixed Decay configured as full H-bridges to drive the motor – Slow Decay windings. The DRV8825 is capable of driving up to – Fast Decay 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C). • 8.2-V to 45-V Operating Supply Voltage Range • 2.5-A Maximum Drive Current at 24 V and A simple STEP/DIR interface allows easy interfacing T to controller circuits. Mode pins allow for configuration A = 25°C of the motor in full-step up to 1/32-step modes. Decay • Simple STEP/DIR Interface mode is configurable so that slow decay, fast decay, • Low Current Sleep Mode or mixed decay can be used. A low-power sleep • Built-In 3.3-V Reference Output mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This • Small Package and Footprint sleep mode can be set using a dedicated nSLEEP • Protection Features pin. – Overcurrent Protection (OCP) Internal shutdown functions are provided for – Thermal Shutdown (TSD) overcurrent, short circuit, under voltage lockout and – VM Undervoltage Lockout (UVLO) over temperature. Fault conditions are indicated via the nFAULT pin. – Fault Condition Indication Pin (nFAULT)
The DRV8825 provides an integrated motor driver 1• PWM Microstepping Stepper Motor Driver solution for printers, scanners, and other automated – Built-In Microstepping Indexer equipment applications. The device has two H-bridge – Up to 1/32 Microstepping drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver • Multiple Decay Modes block consists of N-channel power MOSFET’s – Mixed Decay configured as full H-bridges to drive the motor – Slow Decay windings. The DRV8825 is capable of driving up to – Fast Decay 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C). • 8.2-V to 45-V Operating Supply Voltage Range • 2.5-A Maximum Drive Current at 24 V and A simple STEP/DIR interface allows easy interfacing T to controller circuits. Mode pins allow for configuration A = 25°C of the motor in full-step up to 1/32-step modes. Decay • Simple STEP/DIR Interface mode is configurable so that slow decay, fast decay, • Low Current Sleep Mode or mixed decay can be used. A low-power sleep • Built-In 3.3-V Reference Output mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This • Small Package and Footprint sleep mode can be set using a dedicated nSLEEP • Protection Features pin. – Overcurrent Protection (OCP) Internal shutdown functions are provided for – Thermal Shutdown (TSD) overcurrent, short circuit, under voltage lockout and – VM Undervoltage Lockout (UVLO) over temperature. Fault conditions are indicated via the nFAULT pin. – Fault Condition Indication Pin (nFAULT)
