EasyPrint - PETG - Solid White - 1.75mm - 1kg
EasyPrint PETG - 1.75mm - Solid White
Køb EasyPrint PETG, og få et ekstremt hårdt, holdbart og alsidigt materiale. Dette filament har høj slagstyrke, god fleksibilitet og meget lav materialekrympning. Takket være sine material egenskaber kan dette PETG filament anvendes af flest alle 3D-printere.
Materialegenskaber:
* Opnå imponerende overflader med et ædelt udseende
* EasyPrint PETG er let at printe med
* Høj materialekvalitet og perfekt spooling af materiale på hver rulle
EasyPrint PETG har meget god lag adhæsion, hvilket gør det meget let at printe med. 3D Eksperten anbefaller at printe på SpideSheet, PEI SpiderSheet eller glasplade belagt med klæbende spray eller lim. Der er ikke behov for en opvarmet byggeplade, men hvis du har en, anbefaler vi en indstilling på 40°- 60°C
Se 3D Ekspertens udvalg af byggeplader her
Se 3D Ekspertens udvalg af lim og klæbende spray her
Essential Data:
| Material | PETG |
| Diameter | 1.75mm |
| Tolerance | ± 0.02 mm |
| Heated build platform required | No, but recommended |
| Print Temperature | 210 - 235° C |
| Weight Filament | 1 kg (1000g) |
| Total lenght on spool | 335 m +/- 1% |
| Spool Size | 200 x 66 mm |
| Spool Hub Diameter | 54 mm |
| Empty spool weight | 142g |
Technical data
| Physical | Test method | Value |
| Density | ASTM D1505 | 1.27 g/cm3 |
| Water Absorbation (24 hour immersion) | ASTM D570 | 0.2 % |
| Rockwell hardness | ASTM D785 | 116 R-scale |
| Shrinkage | ASTM D955 | 0.2 - 0.5 % |
| Mechanical | ||
| Tensile strenght @ Yield | ASTM D638 | 53 MPa |
| Tensile strenght @ Break | ASTM D638 | 26 MPa |
| Elongation @ Yield | ASTM D638 | 5.0 % |
| Elongation @ Break | ASTM D638 | 70 % |
| Flexural Strenght | ASTM D790 | 80 MPa |
| Flexural Modulus | ASTM D790 | 2150 MPa |
| Izod Impact Strenght (Notched @ 23°(73°F) | ASTM D256 | 90 J/m |
| Thermal | ||
| Heat Distortion @ 0.455 Mpa | ASTM D1003 | 74° C |
| Vicat Softening Temperature | ASTM D1525 | 83° C |
| Optical | ||
| Light Transmittance | ASTM D1003 | 90 % |
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PETG and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
EasyPrint PETG - 1.75mm - Solid White
Køb EasyPrint PETG, og få et ekstremt hårdt, holdbart og alsidigt materiale. Dette filament har høj slagstyrke, god fleksibilitet og meget lav materialekrympning. Takket være sine material egenskaber kan dette PETG filament anvendes af flest alle 3D-printere.
Materialegenskaber:
* Opnå imponerende overflader med et ædelt udseende
* EasyPrint PETG er let at printe med
* Høj materialekvalitet og perfekt spooling af materiale på hver rulle
EasyPrint PETG har meget god lag adhæsion, hvilket gør det meget let at printe med. 3D Eksperten anbefaller at printe på SpideSheet, PEI SpiderSheet eller glasplade belagt med klæbende spray eller lim. Der er ikke behov for en opvarmet byggeplade, men hvis du har en, anbefaler vi en indstilling på 40°- 60°C
Se 3D Ekspertens udvalg af byggeplader her
Se 3D Ekspertens udvalg af lim og klæbende spray her
Essential Data:
| Material | PETG |
| Diameter | 1.75mm |
| Tolerance | ± 0.02 mm |
| Heated build platform required | No, but recommended |
| Print Temperature | 210 - 235° C |
| Weight Filament | 1 kg (1000g) |
| Total lenght on spool | 335 m +/- 1% |
| Spool Size | 200 x 66 mm |
| Spool Hub Diameter | 54 mm |
| Empty spool weight | 142g |
Technical data
| Physical | Test method | Value |
| Density | ASTM D1505 | 1.27 g/cm3 |
| Water Absorbation (24 hour immersion) | ASTM D570 | 0.2 % |
| Rockwell hardness | ASTM D785 | 116 R-scale |
| Shrinkage | ASTM D955 | 0.2 - 0.5 % |
| Mechanical | ||
| Tensile strenght @ Yield | ASTM D638 | 53 MPa |
| Tensile strenght @ Break | ASTM D638 | 26 MPa |
| Elongation @ Yield | ASTM D638 | 5.0 % |
| Elongation @ Break | ASTM D638 | 70 % |
| Flexural Strenght | ASTM D790 | 80 MPa |
| Flexural Modulus | ASTM D790 | 2150 MPa |
| Izod Impact Strenght (Notched @ 23°(73°F) | ASTM D256 | 90 J/m |
| Thermal | ||
| Heat Distortion @ 0.455 Mpa | ASTM D1003 | 74° C |
| Vicat Softening Temperature | ASTM D1525 | 83° C |
| Optical | ||
| Light Transmittance | ASTM D1003 | 90 % |
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PETG and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
Description
EasyPrint PETG - 1.75mm - Solid White
Køb EasyPrint PETG, og få et ekstremt hårdt, holdbart og alsidigt materiale. Dette filament har høj slagstyrke, god fleksibilitet og meget lav materialekrympning. Takket være sine material egenskaber kan dette PETG filament anvendes af flest alle 3D-printere.
Materialegenskaber:
* Opnå imponerende overflader med et ædelt udseende
* EasyPrint PETG er let at printe med
* Høj materialekvalitet og perfekt spooling af materiale på hver rulle
EasyPrint PETG har meget god lag adhæsion, hvilket gør det meget let at printe med. 3D Eksperten anbefaller at printe på SpideSheet, PEI SpiderSheet eller glasplade belagt med klæbende spray eller lim. Der er ikke behov for en opvarmet byggeplade, men hvis du har en, anbefaler vi en indstilling på 40°- 60°C
Se 3D Ekspertens udvalg af byggeplader her
Se 3D Ekspertens udvalg af lim og klæbende spray her
Essential Data:
| Material | PETG |
| Diameter | 1.75mm |
| Tolerance | ± 0.02 mm |
| Heated build platform required | No, but recommended |
| Print Temperature | 210 - 235° C |
| Weight Filament | 1 kg (1000g) |
| Total lenght on spool | 335 m +/- 1% |
| Spool Size | 200 x 66 mm |
| Spool Hub Diameter | 54 mm |
| Empty spool weight | 142g |
Technical data
| Physical | Test method | Value |
| Density | ASTM D1505 | 1.27 g/cm3 |
| Water Absorbation (24 hour immersion) | ASTM D570 | 0.2 % |
| Rockwell hardness | ASTM D785 | 116 R-scale |
| Shrinkage | ASTM D955 | 0.2 - 0.5 % |
| Mechanical | ||
| Tensile strenght @ Yield | ASTM D638 | 53 MPa |
| Tensile strenght @ Break | ASTM D638 | 26 MPa |
| Elongation @ Yield | ASTM D638 | 5.0 % |
| Elongation @ Break | ASTM D638 | 70 % |
| Flexural Strenght | ASTM D790 | 80 MPa |
| Flexural Modulus | ASTM D790 | 2150 MPa |
| Izod Impact Strenght (Notched @ 23°(73°F) | ASTM D256 | 90 J/m |
| Thermal | ||
| Heat Distortion @ 0.455 Mpa | ASTM D1003 | 74° C |
| Vicat Softening Temperature | ASTM D1525 | 83° C |
| Optical | ||
| Light Transmittance | ASTM D1003 | 90 % |
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PETG and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
